4-5
1. Unplug cooktop or disconnect power.
2. Remove the cooktop glass.
3. Remove elements.
4. Remove 11 screws that mount the
aluminum plate, and 1 ground screw.
Be sure to replace the ground screw
when reassembling, see gure 1.
5. a) Disconnect the 3-wire fan connector
from power control board, see gure 3.
b) Remove two screws from the cooling
fan and lift the fan from the power
control board, see gure 4.
Right Power
Control Board
Left Power
Control Board
Filter (EMI) Board
Right Cooling Fan
Left Cooling Fan
Figure 1
Figure 2
Figure 4
Cooling Fan
2 Screws
Figure 3
Right Cooling Fan
Left Cooling Fan
Left Fan Connector
Right Fan Connector
Remove 10 screws at these locations
1 Ground Screw
Removing a Cooling Fan
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
