Adjustment Using the Menus
23
USER MEMORY menu
Saving the user memory
You can save the 20 picture settings with the name. To
load the picture in the saved setting, see “Loading USER
MEMORY” on page 17.
To save the picture setting
1
Press the M or m key to select the memory number
in the USER MEMORY menu, then press the , or
ENTER key.
The USER MEMORY setting menu appears.
2
Select “SAVE”, then press the , or ENTER key.
The menu for confirming the memory appears.
3
Press the ENTER key.
The current picture settings are saved and the
USER MEMORY setting menu appears.
To close the menu without saving the setting
Press the < or MENU key.
The USER MEMORY setting menu appears.
SERIAL REMOTE Select one out of following three
modes.
• RMT OFF: You cannot use the serial
remote. Adjust settings by the
keys on the front panel.
• RMT ON: You can use the serial
remote. You cannot use the keys
except for the serial remote
setting on the front panel.
• RMT & LCL: You can use both the
serial remote and the keys on the
front panel.
Notes
• When “RMT ON” is selected, the
REMOTE and - indicator on the
front panel light.
• When “RMT & LCL” is selected,
the REMOTE indicator lights.
For details, refer to the Interface Manual
for Programmers (saved in the supplied
CD-ROM, Japanese and English only).
Submenu Setting
x09 USER09
· 10 USER10
· 11 USER11
· 12 USER12
· 13 USER13
· 14 USER14
· 15 USER15
· 16 USER16
USER MEMORY (2/3) Rr
x17 USER17
· 18 USER18
· 19 USER19
· 20 USER20
USER MEMORY (3/3) Rr
x01 USER01
· 02 USER02
· 03 USER03
· 04 USER04
· 05 USER05
· 06 USER06
· 07 USER07
· 08 USER08
USER MEMORY (1/3) Rr
Submenu Setting
01
∼20 You can save the setting of the following
functions.
COLOR TEMP menu
• COLOR TEMP
USER CONTROL menu
• CHROMA
• PHASE
•APERTURE
• GAMMA
•ASPECT
•SCAN
• PIC DELAY MIN
USER SERVICE menu
• ADJUST GAIN
• ADJUST BIAS
Front keys
• 8 (Brightness)
• 6 (Contrast)
01 USER01
xSAVE···
·NAME···
USER MEMORY (1/3)
SAVE TO USER MEMORY 01 ?
[ENTER] YES
[MENU] NO
