Specifications
26
Specifications
Picture performance
LCD panel a-Si TFT Active Matrix
Pixel efficiency 99.99 %
Viewing angle (up/down/left/right, contrast > 10:1)
89°/89°/89°/89° (typical)
Scan Under scan –3 %
Normal 7 %
Over scan 20 %
Efficient picture size
Approx. 376 × 301, 482 mm (w/h, dia)
(14
7
/8 × 11
7
/8, 19 inches)
Resolution H: max. 1,280 dots
V: max. 1,024 lines
Aspect ratio 5:4
Input/output connectors
Input
Composite input connector
BNC type (1)
1 Vp-p ± 3dB sync negative
Y/C input connector
4-pin mini DIN (1)
Y: 1 Vp-p ± 3dB sync negative
C: 0.286 Vp-p ± 3dB (NTSC burst
signal level)
0.3 Vp-p ± 3dB (PAL burst signal
level)
RGB/Component connectors
BNC type (3)
RGB input: 0.7 Vp-p ± 3dB (Sync On
Green, 0.3 Vp-p sync negative)
Component input: 0.7 Vp-p ± 3dB
(75% chrominance standard color
bar signal)
External Sync input connector
BNC type (1)
0.3 to 4 Vp-p ± bipolarity ternary or
negative polarity binary
Remote input terminal
Parallel remote
Modular connector 8-pin (1)
RS-232C (serial remote)
D-sub 9-pin (1)
HD15 input connector
HD D-sub 15-pin (1)
R/G/B: 0.7 Vp-p, 75 ohms, sync
positive (when G channel is sync
negative, the internal sync can be
used. 0.3 Vp-p)
Sync: TTL level, 2.2 kilohms, polarity
free (H/V separate and composite
sync)
Plug & Play function: corresponds to
DDC2B
DVI input connector
DVI-D (1)
TMDS (Single link)
Output
Video output connectors
BNC type (4)
Loop-through, with 75 ohms automatic
terminal function
4-pin mini DIN (1)
Loop-through, with 75 ohms automatic
terminal function
External Sync output connector
BNC type (1)
Loop-through, with 75 ohms automatic
terminal function
General
Power LCD Monitor (LMD-1950MD)
DC IN: 24 V 2.8 A (Supplied from AC
Adaptor)
AC Adaptor (AC-1950MD)
AC IN: 100-240 V 50/60 Hz 0.9-0.4 A
DC OUT: 24 V 2.8 A
Power consumption
Maximum: approx. 66 W (when two
BKM-229X are attached)
Maximum: approx. 59 W (when no
input adaptor is attached)
Operating conditions
Temperature0 °C to 40 °C (32 °F to 104 °F)
Recommended temperature
20 °C to 30 °C (68 °F to 86 °F)
Humidity 30 % to 85 % (no condensation)
Pressure 700 hPa to 1060 hPa
Storage and transport conditions
Temperature–20 °C to 60 °C (–4 °F to 140 °F)
Humidity 0 % to 90 % (no condensation)
Pressure 700 hPa to 1060 hPa
Accessories supplied
AC adaptor AC-1950MD (1)
AC power cord (1)
DC cable (1)
AC plug holder (2)
Instructions for Use (1)
CD-ROM (1)
Using the CD-ROM Manual (1)
Quick Reference (1)
When You First Use the Monitor (1)
Sales Companies Guide (1)
Warranty Card (1)
