Filter
Top Products
Chapter 2 35
NOTE: The asterisk (*) mark indicates that the parameter appears only when you are in the Advanced Level.
The following table describes the parameters found in this menu.
Parameter Description Options
Device Detection Mode Lets you specify the type of hard disk installed in your
system. If you want BIOS to automatically configure
your hard disk, select
Auto
. If you know your hard
disk type, you can enter the setting manually.
Setting this parameter also sets the Cylinder, Head,
Sector, and Size parameters.
Auto,
None, or User. The User
setting allows you to enter your
settings manually if you know
your hard disk type. The Auto
setting also sets the Cylinder,
Head, Sector, and Size
parameters.
Device Type Display the type of device installed. Not configurable. The default
is
Hard Disk
.
IDE Secondary Channel Master
Device Detection Mode ............... [Auto]
Device Type........................ None
Cylinder........................... [0]
Head............................... [0]
Sector............................. [0]
Size............................... [0] M.B.
IDE Secondary Channel Slave
Device Detection Mode ............... [Auto]
Device Type........................ IDE CD-ROM
*Advanced PIO Mode ................... [Enabled]
*DMA Transfer Mode ................... [Enabled]