Filter
Top Products
40 Chapter 2
Power Switch < 4 sec. Lets you specify whether to automatically
turn off the machine or put the system to
Suspend mode when the power switch is
pressed for less than 4 seconds.
Suspend
or Power Off
System Wake-up Event Lets you specify the activity that will resume
the system to normal operation.
Modem Ring Indicator Wakes the system from Sleep mode once
any fax/modem activity is detected.
Disabled
or Enabled
PCI Power Management Allows the system to be awaken by the PME
function.
Enabled
or Disabled
RTC Alarm Allows you to set a certain time on a certain
day to wake-up your system from suspend
mode.
Disabled
or
Enabled
Resume Day If RTC alarm is enabled, the system will
resume operation at the time indicated here.
User Input
Resume Time If RTC alarm is enabled, the system will
resume operation at the time indicated here.
User Input
Restart on AC/ Power Failure When power failure occurs, your system
automatically stops functioning. Setting this
parameter to Enabled lets you set your
computer to automatically turn on once
power resumes. The Disabled setting
leaves the computer off.
Disabled
or
Enabled
ACPI Sleep State When set to S1, system enters standby
mode when power management mode is
enabled. When set to S3, system enters
suspend to RAM mode.
S1
or S3
Parameter Description Options