Filter
Top Products
Mstar ISP Utility Configuration:
Launch the utility of “ISP_Tool Winbond 0315.exe”
S2. Press [Connect] button.
There s a Dialog window shown on the screen. It is the
meaning of connection successful .
Check the video cable and ISP board (D-sub to Printer
port) between LCD monitor to PC host to see if it
disconnected.
Connect VGA
cable between
monitor and kit
Connect printer
cable between
PC and kit
Press Config button
Select AUTO DETECT button that will automatically detect
the device then shows “OK” on the right side.
Hardware Configuration
31
Go to cover page
6. Firmware Upgrade Process
ACER G24