Filter
Top Products
6 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz
1 Software Installation
Installing Software and Instrument Drivers
1 Verify the PC Meets Minimum Requirements
• 1 GHz Intel Pentium processor
• Microsoft Windows XP Professional or Home Edition (Service Pack 1
or 2), Windows 2000 (Service Pack 2)
• 512 MB of RAM
• Up to 40 MB of available hard- disk space
• Microsoft Internet Explorer 6.0 (or higher), or Netscape 7.1 or 8.0
2 Place the CD with the Instrument Drivers and Documentation in the CD-ROM drive.
3 Click Instrument Drivers.
NOTE
a Adobe Acrobat Reader 5.0 or later is used during this installation process and can be
installed from the CD described above.
b Click Adobe Acrobat Reader 5.0 to install the software, if needed.
CAUTION
If the following software or instrument drivers are installed on the PC to be used, uninstall
them and install the software and instrument drivers shipped on the CD described above:
Step 1. Microsoft .NET 1.1
Step 2. Agilent I/O Libraries
Step 3. IVI Shared Components
Step 4. Agilent Synthetic Instrument Finder
Step 5. Agilent Synthetic Instrument GUI
Step 6. IVI-COM Drivers (for N8201A with Option H02 and without Option H02)
Step 7. Agilent N8201A Performance Downconverter User Interface
(Optional) Install the following only if the downconverter has Option H02
Step 8. Agilent N8201A Option H02 Spectrum Analyzer GUI
(Optional) Steps 9, 10, and 11 are available to support legacy installations and are not
required if the software from Step 8 is being used. This interface can be installed along with
the Agilent N8201A Option H02 Spectrum Analyzer GUI, but only one interface can be used
at any given time.
Step 9. Microsoft Virtual Machine (VM)
Step 10. Apache HTTP Server
Step 11. SA Remote Web Server