Filter
Top Products
Hardware Setup and Configuration 2
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz 57
Figure 2 Connecting the PC LAN cable to the instrument LAN (cross-over cable)
3 Turn on power to the PC.
4 Turn on power to the N8201A performance downconverter and wait until the LAN LED
turns solid green; this takes about 60 seconds.
5 From the Windows Desktop,
click Start > All Programs > Agilent SI Tools > Synthetic Instrument Finder.
The following Synthetic Instrument Finder dialog box should appear.
6 Select the N8201A performance downconverter listed in the Agilent Synthetic
Instrument Finder dialog box to access the N8201A performance downconverter Web
page.