Filter
Top Products
28 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz
2 Hardware Setup and Configuration
Step 1. Unpack the N8201A Performance Downconverter
Verify the Shipment
1 Inspect the shipping container for damage.
Signs of damage may include a dented or torn shipping container or cushioning material
that shows signs of unusual stress or compacting.
2 Carefully remove the contents from the shipping container and verify that the order is
complete.
The following items are shipped standard with each N8201A performance
downconverter:
• instrument drivers, synthetic graphical user interface, and documentation CD-ROM
(p/n N8200-90004)
• three-prong AC power cord specific to geographic location
(Optional) Prepare the Instrument for Rack Mounting
WARNING
The unique shape of the N8201A performance downconverter was intended to allow
multiple instruments to reside in a compact system that is both modular and
transportable. With instruments adjacent to each other, handles could not be installed on
the respective instruments. Exercise caution when lifting and carrying the instrument to
avoid personal injury. At 25.9 kilograms (57 pounds) shipping weight and 19 kilograms
(42 pounds) net weight, it is recommended that two people be utilized for instrument
lifting and transport.
NOTE
Verify that any options ordered are included with the shipment by checking the packing
literature included with the shipment.
The serial number label on the N8201A performance downconverter only verifies
hardware/firmware options. The packing literature verifies all items shipped.
CAUTION
If the N8201A performance downconverter is to be placed in a system rack, the feet
currently attached can be replaced with the rack mount feet (part number
W1312-40032) supplied with the accessories. Failure to do so can result in a safety
issue. For further information, refer to the Agilent N8200A Series Synthetic
Instrument Modules, Rack Configuration Guide, N8200-90003.