Aiwa XD-DV520 DVD Player User Manual


 
ENGLISH
11
PREPARATIONS
En
Before making connections
Connect the AC cords of the unit and any external
equipment last, after finishing all other connections.
Insert the plugs completely into the jacks. Loose
connections may produce a humming sound or other
noise interference.
•Refer to the instructions of the connected equipment.
CAUTION
Do not set "Dolby Digital" to "Bitstream", and "DTS" to
"Bitstream" in the setup menu when connecting to an AV
receiver not equipped with a Dolby Digital decoder or DTS
decoder (with a coaxial connecting cord).
Merely attempting to play a DVD may cause a screeching
noise which could be harmful to your ears and damage
the speakers. In such a case, be sure to select "PCM" in
"Digital Out".
Before connecting, identify your type of audio equipment or TV referring to the following chart. Then, decide the connection
and the setup procedure accordingly .
NOTES
The unit cannot be connected to a TV which is not equipped with a video input connector .
Use a commercially available stereo-monaural audio cord when connecting to a monaural TV.
Audio system to be connected
None (only a TV is connected)
A stereo system or an amplifier
An AV receiver equipped with DTS decoder
Connection type
A on page 12
B on page 13
C on page 14
D on page 15
F on page 17
E on page 16
Input jack of equipment to
be connected to the unit
––––
Digital input jack
Analog audio input jacks (L/R)
Digital input jack
Analog audio input jacks (L/R)
Digital input jack
An AV receiver equipped with Dolby Digital decoder or a
Dolby Pro Logic decoder
CONNECTIONS
CONTINUE
NOTES
If picture noise appears while playing copy-protected
DVDs, connect the unit directly to a TV. Do not connect
through a VCR, TV/VCR, or AV selector .
For speaker connection, refer to the instructions of the
AV receiver.
When your TV is equipped with an S-video input jack, see page 18.
When your TV is equipped with component video input jacks, see page 19.