Aiwa XD-DV520 DVD Player User Manual


 
ENGLISH
15
PREPARATIONS
En
AUDIO OUT VIDEO OUT
COMPONENT
VIDEO OUT
DIGITAL OUT
S-VIDEO OUT
COAXIAL
R
L
2
1
C
R
Y
C
B
D Connecting to a TV and an AV receiver equipped with a Dolby Digital (AC-3)
decoder
Use either a commercially available optical cord or a 75 ohm coaxial cord when connecting this unit to an AV receiver with
a Digital In jack. The supplied Audio/video cord is also available instead of a coaxial cord.
Set the setup menu correctly after connecting!
Set the "TV Aspect" and "Digital out" of the setup menu
according to the audio equipment and TV connected to the
unit as follows:
(See "CHANGING SETUP VALUES" on page 40 for details.)
Digital out
"Dolby Digital" to "Bitstream"
"DTS" to "Off"
TV Aspect
When your TV is a conventional-screen size TV:
L-BOX or P-SCAN
When your TV is a wide-screen size TV:
16:9
CONTINUE
TV
yellow
to the video input jack (yellow)
Audio/video cord (supplied)
yellow
to VIDEO OUT 1 or 2 jack (yellow)
Rear of the unit
to DIGITAL OUT COAXIAL jacks
Coaxial cord (not supplied)
to an AC outlet
Receiver equipped with
a Dolby Digital decoder
Front speaker (L)
Surround speaker (L) Center speaker Subwoofer Surround speaker (R)
Front speaker (R)
CAUTION
When connecting an AV receiver not equipped with a Dolby
Digital decoder using a coaxial connecting cord, do not
set "Dolby Digital" to "Bitstream" in "Digital out" of the
setup menu.
Merely attempting to play a DVD may cause a screeching
noise which could be harmful to your ears and damage the
speakers. In such a case, be sure to set "Dolby Digital" to
"PCM" in "Digital Out".