Filter
Top Products
44
ENGLISH
CHANGING SETUP VALUES (CONTINUED)
Audio set
To emit test tone
You can hear a noise tone emitted from the front left and
right speakers alternately .
If the noise tone from the left speaker and the right speaker
are heard unevenly , adjust the left and right speaker balance
using the connected equipment.
1
Press j/l to select "Audio set" on
the setup menu and press OK c.
2
Confirm that "Test Tone" is selected,
and press OK c.
Noise tone is emitted from the front left and right speakers
alternately .
3
Press OK c to stop the noise tone.
4
Press f/g to select "Exit" and
press OK c.
To exit the setup menu
Select "Quit" and press OK c, or press EXIT.
To adjust DRC (Dynamic Range Control)
When listening at a low volume, the volume of loud sounds
such as explosions, etc., can be reduced, and the volume
of quiet sounds such as whispered dialog, etc., can be
increased using the DRC.
1
Press j/l to select "Audio set" on
the setup menu and press OK c.
2
Press f/g to select "DRC" and
press OK c.
3
Press j/l to adjust DRC.
Select this mode when playing back at a low volume.
Pressing j twice at the above illustration makes DRC
maximum.
Select this mode when you want to enjoy the full dynamic
range of sound.
Pressing l three times at the above illustration makes DRC
minimum.
4
Press OK c.
5
Press f/g to select "Exit" and
press OK c.
To exit the setup menu
Select "Quit" and press OK c, or press EXIT.