Filter
Top Products
40
ENGLISH
All the basic settings of the unit are properly
preset at the factory.
• Check that "Digital out" and "TV aspect" in the setup
menu are correctly set according to the type of equipment
connected to the unit. For details on the setting, refer to
the "Connections" section on pages 11 to 19.
• Change any other settings according to your individual
setup preferences.
Basic operations
1
Press MENU in stop mode.
The setup menu is displayed.
2
Press j/l to select the item to be
changed, then press OK c.
Language
Sets the audio soundtrack language, subtitle language,
DVD menu screen language and on screen display
language.
Subtitle
Turns on and of f the subtitle.
TV aspect
Sets the color system and aspect ratio of the TV connected
to the unit.
Audio set
Emits test tone and adjusts the DRC (Dynamic Range
Control).
Digital out
Sets the digital audio to be output from the unit according
to the type of audio equipment connected to the unit.
Parental
Sets the preset restriction level for playback.
When playing discs with preset restriction level encoding,
the unit automatically cuts scenes of excessive violence,
etc.
On screen
Turns on and of f the command response shown on the top
corner of the TV screen.
Quit
Exits the setup menu.
3
Press f/g to select the desired
setting and press OK c.
4
Press f/g to select "Return"
and press OK c.
Some items require additional steps.
For details of the setting options for each item, see the
procedure of each setting on the following pages.
To exit the setup menu
Select "Quit" and press OK c, or press EXIT.
CHANGING SETUP VALUES
EXIT
MENU
OKc
j,l
f,g