Filter
Top Products
5.3 SEQUENCE SETTING
This page enables you to set the dwell time for displays in each channel and the 4-windows ( )
mode at your own preference anywhere between 0 (no-show) and 90 seconds when you press the
button.
Note: The
button only works in the Live and Record modes.
SEQUENCE SETTING
1.CH1 03
2.CH2 03
3.CH3 03
4.CH4 03
5.QUAD 03
SEC
SEC
SEC
SEC
SEC
MAIN MENU
1 QUICK SETTING ENTER
2 DISPLAY OPTION ENTER
3.SEQUENCE SETTING ENTER
4.PICTURE ADJUST ENTER
5.ADVANCED SETTING ENTER
6.DISK SETUP ENTER
7.SYSTEM SETTING ENTER
Please choose the item, and then use the “^” and ”v” buttons to make any changes.
Note: In the Live/Record mode, press the
button to start the sequence display mode
(
then loop back) and the icon will show on the screen
simultaneously.
5.4 ADJUST PICTURE
This page enables you to position your images the way you desire.
You can use the “^” and ”v” buttons to adjust the BRI (brightness) and CON (contrast) properties of
the live images in each channel.
MAIN MENU
PICTURE
PICTURE ADJUST
CH1
1 QUICK SETTING ENTER
2 DISPLAY OPTION ENTER
BRI 5[ ■ ]
CON 5[ ■ ]
CH2
BRI 5[ ■ ]
CON 5[ ■ ]
CH3
BRI 5[ ■ ]
CON 5[ ■ ]
CH4
BRI 5[ ■ ]
CON 5[ ■ ]
3.SEQUENCE SETTING ENTER
4.PICTURE ADJUST ENTER
5.ADVANCED SETTING ENTER
6.DISK SETUP ENTER
7.SYSTEM SETTING ENTER
21