Filter
Top Products
5.7 SYSTEM SETTING
Enter the system setting mode to select your desired setting.
PROGRAM FLASH: SUCCESS
PRESS POWER KEY TO RESTART
MAIN MENU SYSTEM SETTING
1 QUICK SETTING ENTER
1.VIDEO SYSTEM NTSC
2 DISPLAY OPTION ENTER
2.MENU PASSWORD 9999
3.SEQUENCE SETTING ENTER
3.MENU PWD ENABLE OFF
4.PICTURE ADJUST ENTER
4.LOAD FACTORY SETTING ENTER
5.ADVANCED SETTING ENTER
5.UPDATE FIRMWARE ENTER
6.DISK SETUP ENTER
SYSTEM VERSION 1.00
7.SYSTEM SETTING ENTER
1. VIDEO SYSTEM:
Select the NTSC or PAL formats. In the NTSC system, the time display type is MM/DD/YYYY. If
the user selects the PAL system, the type will change to DD/MM/YYYY automatically.
2. MENU PASSWORD:
This option lets you set a password to block any unauthorized entry. The default password is
9999. Use the “^” or “v” button to set a 4-digit password of your choice.
3. MENU PWD ENABLE:
Activate to ON ( enable ) or OFF ( disable ).
After setting the password and enabling this function, when you enter the MAIN MENU the next
time, a message of “CHECK MENU PASSWORD” will appear. Please enter the correct
password, then press the Enter button to enter the MAIN MENU.
4. LOAD FACTORY SETTING:
If you want to execute the default setting, shift the focus to this item and enter. After entering the
item, a message of “LOAD FACTORY SETTING” will appear. If you want to load the factory
setting, please select “YES”, then press the Enter button.
5. UPDATE FIRMWARE:
If the system software of the DVR needs to be upgraded, please take the following steps to
safely update it.
(1) Copy the file of update.bin into your USB device.
(2) Please highlight UPDATE FIRMWARE, then press the Enter button.
(3) After entering the item, a message of “UPDATE FIRMWARE?” will appear.
(4) If you want to update the system software, please select “YES”, then press the Enter
button.
(5) When a message of appears, please press the power
button to restart the device.
NOTE: Before carrying out the following procedures, please ensure the USB device is
working and the system software file is intact.
6. SYSTEM VERSION:
You can find the software version here.
28