Open as PDF
Before calling for service, it is advisable to refer to the troubleshooting table below.
25. TROUBLESHOOTING TABLE
SYMPTOM POSSIBLE CAUSE(s) SOLUTION(s)
Load the DISC correctly.
Clean the DISC.
DISC is loaded Incorrectly.
DISC is dirty.
DISC is scratched or warped.
Replace the DISC
Video cable is disconnected. Connect the cable firmly.
Input selector on the TV set is
Set the selector so that the TV set
displays video received from DVD
Audio cable is disconnected. Connect the cable firmly.
Input selector on the amplifier
is set improperly.
Set the selector properly.