Filter
Top Products
2. Video Setup
The player’s TV output color is selectable to either
PAL or NTSC.
If the TV set is NOT a multi video system, and the following is observed on the TV
screen, it could be a result of the wrong color system matched to the TV set.
Symptoms of a mismatch are,
Picture is distorted
Picture is black and white with no color
Picture is not full screen, or the border portion of the picture is blocked
NOTE: The DVD Player is set to NTSC system output by default. If you are not
playing in the U.S.A. or know you are on a PAL system, please change the
output system of the player using the steps below.
1. Set the TV set’s system to the proper setting, or
2. Change the DVD player’s output system setting as following:
Press SETUP on remote control,
Go to PREFERENCES
Select the TV TYPE then choose MULTI.SYSTEM, NTSC, or PAL.
NOTE: If the above steps DO NOT fix the problem, see the
TROUBLESHOOTING section of this manual.
17