Filter
Top Products
20
OSD MENU Description
YES
HARD DRIVE SETUP
OVERWRITE ENABLED
HDD SIZE 37 GB 78MB
HDD USED 0 GB 232MB 0%
HDD FORMAT
* HDD SIZE shows the total capacity
of the hard disk.
* HDD USED shows the amount of
space that has been used.
OVERWRITE ENABLED :
Enable/disable replacing the earliest recorded file when
the hard disk space runs out. By default, the HDD
overwrite setting is enabled.
HDD FORMAT :
For security purpose, you may have to enter the
password to format hard disk.
To format hard disk:
1. Use the
▲
and
▼
or and
buttons to go up and down and select
HDD FORMAT
. Then press
or
▲
(play).
2. In the
CHECK PASSWORD
screen, press
,
▲
(play) or
▼
▼
. Then use the
▲
and
▼
or and buttons to
select the security combination number.
Press
,
▲
(play), or
▼
▼
button again to
make the selection. Or, use the number key
buttons on the remote control to enter the
password.
3. To move the selection to the left and right, use
▼
▼
and
▼
▼
buttons.
CHECK PASSWORD
ENTER PASSWORD
4. After entering the last number, the “PASSWORD
CORRECT” appears, you are now authorized to
format the hard disk.
5. It is done when the “HDD FORMAT COMPLETED”
appears.
Formatting the hard disk will permanently
delete all the recorded files. The recorded
files will be no longer for retrieving.