Filter
Top Products
22
Chapter 4 Setup DVR in LED Mode
Besides OSD menu mode, user can setup DVR system in LED mode with remote
control. To setup the DVR system, refer to the following function description.
- Press button to enter or exit setup function
- Use
▲
and
▼
button to select setup function
- Press button to confirm selection.
The following table list the symbols display in LED mode.
Function
Symbol of Title
Symbol of Selection
Camera Select
[NOTE]
The recording function must be
stopped when set up this
function.
The channel with dot sign
means the channel is
recording(ex. )
(Channel 1)
(Channel 2)
(Channel 3)
(Channel 4)