Filter
Top Products
AVerMedia User’s Manual
EYES Pro/MP2016/MP3000/MP5000
55
Call Out:
If you have a voice modem installed, you can make the system to
call out to landline/mobile phone or pager (maximum 5 sets in total)
once an alarm is triggered. Follow the following instructions.
A. Check Call Out to enable this function.
B. Select a correct model for your voice modem from the drop-
down menu of Voice Modem Installed.
C. Click
to bring up the dialog box below to set
up the telephone information. Here you should follow the
steps described below to set the landline/mobile phone or the
pager number.
a. Select Pager or Phone.
b. Key in the numbers for the landline/mobile phone or
the pager, whichever you selected in step a. If you’re
setting up a pager info., you can compose a text
message you wish to send to a pager by using
numbers, *, and # in the Message field. If you’re
setting up a phone info., you can browse for a .WAV
file by clicking
or create a new .WAV file by
AVerMedia User’s Manual
EYES Pro/MP2016/MP3000/MP5000
56
clicking . After you complete the pager
or phone information, click
to add this
number to the table.
c. Select Dial next line if busy or Dial All. In the
former case, the system will dial the next number
when the current one is busy. But if the call enters
the voice mail of the mobile phone or gets picked up
by an answering machine, the system will act as if the
call-out is completed and won’t dial the next line.
Therefore, it is recommended for you to select the
latter one, in which case the system will dial all
numbers and send the warning message.
d. The
/ buttons allow you to
update/delete a pager or a landline/mobile phone
number. To update, you need to first select the target
number, key in the updated information, and then
click
. To delete, simply select the target
number and click
.
Email:
You can email alarm messages once an alarm is triggered. Follow
the instructions below.
A. Check Email to enable this function.
B. Set the interval period and time to send the emergency e-mail.
C. Click
to bring up the dialog box below to set
up the email information.