AVerMedia Technologies MP5000 DVR User Manual


 
AVerMedia User’s Manual
EYES Pro/MP2016/MP3000/MP5000
129
F. Check Allow caller access to enable the Dial-up Server. Click
to set the login password and then click
to change the server type. Select PPP
from the drop-down menu and then click the OK button to
finish the ISDN setup for the server end.
2. Client:
A. Go to StartÆProgramsÆAccessoriesÆCommunications
and click Dial-up Networking. Double-click Make New
Connection to bring up the Make New Connection wizard.
Enter the server’s name and select the ISDN device you are
using. Click the Next button to continue.
AVerMedia User’s Manual
EYES Pro/MP2016/MP3000/MP5000
130
B. Provide the server’s telephone number, including the area code,
and click the Next button to finish creating the new connection.
C. Go back to the Dial-up Networking window and double-click
the connection you just created. In the Connect to dialog box,
enter any User name and the Password set in step F of the
server’s ISDN setup procedure. Click
to start
connecting to the AVerMedia EYES
Pro/MP2016/MP3000/MP5000 server.
D. After you get connected, access Start Æ Programs Æ Digital
Video Surveillance System Æ RemoteManager to launch
RemoteManager. Refer to Chapter 6 RemoteManager to login.
(Default IP address: 192.168.55.1)