BenQ H200:A Flat Panel Television User Manual


 
BENQ Corporation
Operation 20
Sound Volume Adjustment
SOUND FUNCTION
VOL(+)/(-)
MUTE
MTS
1. Press VOL+” to increase the sound volume. The length of the indicator
increases.
2. Press “VOL– “to decrease the sound volume. The length of the indicator
decreases.
To mute the sound
1. Press “MUTE” to temporarily turn off the sound. The MUTE mark is
displayed.
2. Press MUTE” or “VOL+/–“ to restore the sound back to the previous level.
3. The mute function is automatically turned off when any of the following buttons
are pressed: ”POWER”, ”VOL+/-“, ”MUTE”, “MTS”.
To select different TV audio system
(There will be different selections in different TV systems)
Press “MTS” to display and select different TV audio systems.
Example 1: NTSC MTS system:
[STEREO]: stereo audio
[SAP]: second audio program
[MONO]: monophonic audio
Example 2: PAL Nicam
[STEREO], [MONO], [LANGUAGE A], [LANGUAGE B]
Changing the Channels
Changing channels by using Channel Select on the remote control.
Depending on different territories, this LCD TV set allows you to select a varied number of channels.
To select a 1- or 2-digit channel number (e.g., Channel 7):
Complete the following procedure within 3 seconds.
1. Press the “0” button.
2. Press the “7” button.