BenQ H200:A Flat Panel Television User Manual


 
User’s manual
Safety precautions 7
If problems occur during use
If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from
the H200, unplug the power cord immediately.
Continuous use of the Display under these conditions might cause fire or permanent damage to the unit. Have
the Display evaluated at an Authorized Service Center. Services to the Display by any unauthorized personnel
are strongly discouraged due to its dangerous high voltage nature.
If water or foreign objects get inside the TV, if the TV is dropped, or if the cabinet becomes damaged,
disconnect the power cord plug immediately.
A short-circuit may occur, which could cause fire. Contact an Authorized Service Center for any repairs that
need to be made.
CAUTION
When using the LCD TV H200
To turn off the main power, be sure to remove the plug from power outlet. The power outlet socket should be
installed as near to the equipment as possible, and should be easily accessible.
Be sure to disconnect all cables before moving the LCD TV.
Moving the Display with its cables attached might damage the cables, which, in turn, can cause fire or electric
shock.
Disconnect the power plug from the wall outlet as a safety precaution before carrying out any cleaning.
Electric shocks can result if this is not done.
Clean the power cable regularly to prevent it from becoming dusty.
Built-up dust on the power cord plug can increase humidity, which might damage the insulation and cause fire.
Unplug the cord from the wall outlet and clean it with a dry cloth.
Do not insert any objects or liquids into the unit.
Do not expose the unit to water or moisture, or otherwise to the elements
Do not open the unit for any reason. Doing so will void the warranty!
Unplug the unit if it will not be used for an extended period of time
Avoid placing the unit near sources of heat
Avoid placing the unit in direct sunlight
In any event, if any problems arise, contact your dealer immediately!