BenQ H200:A Flat Panel Television User Manual


 
BENQ Corporation
Function operation 24
Aspect Controls
ASPECT
ASPECT
1. You can directly press “ASPECT” button on Remote Control as
illustrated to select the Image Aspect Ratio you prefer and the
screen display information appears as follows:
Advance menu (In Video Mode)
Setting the ASPECT on the MENU screen
1. Press “MENU ” or “MENU buttons on the Remote
Control or “Menu” button on Control Panel to select
“Advance
” main menu page, then the main menu screen
will appear as illustrated.
2. Press orto select “Aspect Ratio” setting and press
orto adjust it.
Mode Explanation
Fill Screen Any input signal scale to fit the 4:3 full screen.
Anamorphic This mode is suitable for HDTV signal and DVD titles marked with "Squeeze" or
"Anamorphic". When playing this kind of DVD title, remember to set the TV type setting in
DVD player to 16:9 mode (wide screen). And use "Anamorphic" mode to present the movies
in correct aspect ratio and better image quality. It will lose a little information of both sides
and a little bit of the picture will be cropped from each side.
HDTV (4:3) This mode is suitable for HDTV signals that directly translate 4:3 material to 16:9 format. This
kind of HDTV signal will have black areas on both sides. Use this mode to remove the black
area and present the 4:3 materials in full screen. This mode will cause more of the picture on
each side to be cropped and will cause a little loss of the 16:9 HDTV signal.