Filter
Top Products
8x8 and 16x16 VGA / HDTV Matrix Switch with Audio, RS232 & IP Control
21
4 = Schedule On
5 = Schedule Off
ESC = Quit
Note: You have 16 seconds to make your selection, or the command is cancelled.
Response: if “1”, “2” or “3” was entered
Enter weekday Timer1 hour (00-12): Hit Enter if you want to keep previous value
Enter weekday Timer1 minute (00-59):
Enter weekday Timer1 AM/PM (0-1):
Enter weekday Timer1 preset pattern (0-16):
Remember Preset 0 disconnects outputs
.
…… (data for timers 2 & 3, hit Esc if you are done at any time)
.
Enter weekday Timer4 hour (00-12):
Enter weekday Timer4 minute (00-59):
Enter weekday Timer4 AM/PM (0-1):
Enter weekday Timer4 preset pattern (0-16):
Response: if “4” was entered (schedule on).
Schedule setting is ON<cr>
- - - - - Alternate Response: In case of an inconsistency or error in entry
Schedule setting cannot be ON because weekday (weekend) TimerX is less than
or equal to TimerY<cr>
Response: if “5” was entered (schedule off).
Schedule setting is OFF<cr>.
Response:
if “ESC” was entered (Quit).
Quit schedule setting<cr>.