Buffalo Technology HS-DTGL/R5 Home Theater Server User Manual


  Open as PDF
of 84
 
22
11. Diagnostic LED–TheDiagnosticLEDmay
ashwhentheTeraStationencountersanerror.
Inthisevent,pleasecontactour24/7technical
support at (866) 752-6210 (USA & Canada
only; see page 71 for European tech support
information).
12. Power – This LEDglows a steady green
whiletheTeraStationisoperatingnormally.It
blinks quickly during bootup and shutdown,
and slowly while the TeraStation is in sleep
mode.
13. Link/Act–ThisLEDwillglowwhenthe
TeraStationisconnectedtoanetwork,andblink
during normal network activity. It changes color
toindicate thespeed ofthe connection: blue
fora1000Mbpsconnection,greenfor100Mbps,
andredfora10Mbpsconnection.
14. Power Socket–Plugthepowercordinto
this socket.
15. Power Switch – This is the TeraStation’s
masterpowerswitch.Whileitison,thepower
buttononthefrontpaneloftheTeraStationmay
beusedtostartandshutdowntheunit.When
thisswitchisoff,nopowergoestotheunit.If
thisswitchisleftoffforanextendedperiodof
time, the TeraStation’s internal system clock
mayneedtobereset.
16. Internal Fan–Theinternalfanwilladjust
itsspeedaccordingtothetemperatureinsidethe
TeraStation.  Toprevent possible overheating,
keep the fan clear and clean of obstacles or
dust.
17. INIT Button – The INIT button restores
your TeraStation to factory default settings. See
page54formoreinformationonusingtheINIT
button.
TeraStation Diagram
 previous next