Filter
Top Products
Chapter 4 Web Admin interface
LinkStation User Manual 125
Name
Descriptions
IP Address Settings
Click [Modify Settings]
to change settings.
DHCP If enabled, the LinkStation will attempt to get its IP address
from a DHCP server on the network.
Primary IP Address Set IP address.
Subnet Mask Set Subnet Mask.
Default Gateway
Address
Specify by IP address if Default Gateway Address exists.
Primary DNS Server Specify an IP address of the DNS server which has priority.
Secondary DNS
Server
Specify an IP address of an alternative DNS server.
Ethernet Frame Size
Click [Modify Settings]
to change settings.
Ethernet Frame Size Ethernet frame size is the maximum size of data that can be
sent at a time. If all devices on your network support Jumbo
Frame, you may be able to improve transmission eciency by
choosing a larger frame size than the default.
• [1518 bytes (Default)] It is set to 1518 bytes at
default.
• [4102 bytes (Jumbo Frame)] Transfer at 4102 bytes.
• [7422 bytes (Jumbo Frame)] Transfer at 7422 bytes.
• [9694 bytes (Jumbo Frame)] Transfer at 9694 bytes.
Network Services
Network Services Enable or disable AFP and FTP.
[AFP] must be enabled here for Mac OS computers to connect
via AFP. Also, enable AFP in the shared folder settings to use
AFP.
[FTP] must be enabled here for remote users to access the
LinkStation via FTP. Also, enable FTP in the shared folder
settings to use FTP.
Network
The following options can be set from the [Network] screen.