Buffalo Technology LSV40TL Home Theater Server User Manual


 
LinkStation User Manual 152
Appendix
The following settings are factory defaults for the LinkStation.
Default Settings
Administrator's Name admin
Password password
Shared folders By default, the folder “share” may be accessed from both Windows and
Macintosh computers. The recycle bin is [Enabled] on ‘share’ by default.
DHCP Client Normally, the LinkStation will get its IP address automatically from a
DHCP server on the network. If no DHCP server is available, then an IP
address will be assigned as follows:
IP Address: 169.254.xxx.xxx where xxx are random numbers between 1
and 254.
Subnet Mask: 255.255.0.0
Registered Group The LinkStation has 3 default groups: hdusers, admin and guest. You
cannot edit or delete these groups.
Microsoft Network
Group Setting
WORKGROUP
Note: If you installed the LinkStation from the LinkNavigator installation
CD, then the LinkStation's workgroup is set to the same workgroup as the
computer you used for setup.
Ethernet
Frame Size
1518 bytes
AFP Disabled
FTP Disabled
NTP Automatic
PrintServer Enabled
WebAccess Disabled
Media Server
(DLNA/iTunes)
Enabled
BitTorrent Disabled
Note: The installation program on the LinkNavigator CD can only congure a LinkStation once.
To automatically install a LinkStation a second time, use the Init button to initialize the
LinkStation’s conguration rst.