Chapter 4 Web Admin interface
LinkStation User Manual 145
Name Descriptions
Restore/Erase
Restore
Factory
Defaults
Upon restore Click [Modify Settings] and select whether or not Initialization will reset the
admin password.
Note: If [Keep current admin password] has been selected, you cannot
recongure the LinkStation without the password. Please write down the
password and keep it in a safe place!.
Restore
LinkStation
The following settings are initialized by [Restore LinkStation].
LinkStation Name, Description, NTP Settings, Workgroup Settings, Shared
Service Settings, Access Restrictions for Shared Folders, User Settings, User
Group Settings, E-mail Notication, UPS Settings, Backup Jobs Setup, Admin
username and password, Print server settings, WebAccess, Language settings,
SleepTimer, HDD Spindown, Media server settings, BitTorrent settings, Time
Machine conguration, Web Server, and MySQL Server.
Note: The following tasks require a [Conrm Operation] screen.
• Delete Folder
•
Restore LinkStation
•
Format LinkStation
• Erase Disk
Enter the number shown in the [Conrmation Number] eld within 60 seconds,
and click [Apply].
Erase
Erase Clicking [Erase] will erase data completely on the hard drive of the LinkStation.
Note: • All data will be erased. There is no “undo” for this!
• While erasing, the settings for the LinkStation cannot be changed.