Filter
Top Products
LinkStation User Manual 163
Appendix
Info/Error LED
The Info/Error LED blinks orange when it has a message. The message is coded by the pattern of
blinking.
Note: The messages are also available (uncoded) in NAS Navigator2.
Information code Descriptions
I01 Checking the system area.
I11 Many defective sectors have been found.
I12 The RAID array is being degraded mode.
I13 The RAID array is being formatted.
I14 The RAID array is being checked.
I15 The error status of the RAID array is being investigated.
Data transfers will be slower than usual until this is complete.
I16 The RAID array is being created.
I17 The RAID array is being resynchronized.
Data transfers will be slower than usual until this is complete.
I18 The RAID array is being recongured.
Data transfers will be slower than usual until this is complete.
I19 The RAID array is being erased.
I20 Formatting the hard drive.
I21 Checking the hard drive.
I23 Initializing the system settings
I25 Updating the rmware
I27 Checking a USB drive
I28 Formatting a USB hard drive
Place Status
10s place The LED illuminates for 1 second every 0.3 seconds.
The number of ashes is the tens place of the information code.
1s place The LED illuminates for 0.5 seconds every 0.3 seconds.
The number of ashes is the ones place of the information code.