Cambridge Audio DV30 TV DVD Combo User Manual


 
12
Remote control
The DV30 is supplied with a Navigator remote control which operates this
unit. In addition it can also operate a matching AR30 or DR30 2.1 receiver
and their supplied docking station for iPod, and/or a CD30 CD player.
Always use alkaline batteries.
Important!
The default mode for remote operation is multi-functional control.
To control the DV30 in this mode, first press the DVD button on the remote
(which also selects the DVD source).
To control other functions of an AR30 or DR30, their built-in tuners, DD30
dock for iPod or a CD30, first press the required source (e.g. MP3 for iPod,
CD for CD30, etc.) to select the right mode.
If you do not have an AR30 or DR30, you can lock your remote to DV30
control. This means that you do not need to press the DVD button to access
DV30 control. Hold down the DVD button whilst inserting the batteries to
lock the remote to DV30 control mode. To restore the default mode, remove
the batteries and allow a five-minute interval before re-inserting them.
Open/Close
Press to open or close the disc tray.
Standby/On
Switches the unit between low-power Standby and On modes.
Numerical buttons
Press the number of a desired chapter or track to go directly to it. To select
a number greater than ten, press 10+ once followed by the second digit
(e.g to select 15 press 10+ followed by 5). To select a number greater than
20, press 10+ twice followed by the second digit (e.g. to select 23 press
10+ twice followed by 3). These buttons can also be used to select tuner
presets on an AR30 or DR30, or tracks on a CD30.
Return
Press to return to the previous operation in any disc setup menu.
Angle
Press to access various camera angles (if available on the DVD disc).
Subtitle
Press repeatedly to scroll through different language Subtitles (if available
on the DVD disc).
Brightness
Switches the display brightness between bright and dim.

Navigation
Press the directional arrows to move around the Setup menus.
Enter
Press to accept the item or function highlighted in the display menu.
Disc Title
Press to access the DVD’s Title menu. This is usually the root menu from
where the film can be started or where navigation to scene selections or
special features, etc., can be made.
Disc Menu
Press to go to a DVD disc’s own setup menu.
Setup
Press to enter the DV30's Setup menu. Please refer to the DVD Player
Setup section of this manual for more information.
Audio
Press to access alternate audio soundtracks on the DVD (if available on
the DVD disc).