Filter
Top Products
22
Important Note
Some TVs may have occasional problems re-acquiring an HDMI signal (no picture
or incorrect colour balance appears) when an HDMI setting is changed on the DVD
player.
Should this happen, simply re-select the default HDMI Resolution via the DV30's
Video Setup menu:
This allows your TV to re-acquire the signal and for normal operation to resume.
Angle Mark
For DVDs recorded with multi-angular scenes, you can change the angle of the screen.
There are two modes in the Angle Mark setting: ‘On’ and ‘Off’. When set to ‘On’, the
current playing angle number is displayed in the top right hand corner of the TV screen.
When set to ‘Off’, no angle mark number is displayed on the TV screen.
Note: The angle number differs from disc to disc or from scene to scene.
Press Angle on the remote control to switch between multi-angles.
OSD Language
There are seven language modes to select from: English, Spanish, German, French,
Italian, Dutch and Danish.
Screen-Saver
If you activate the screen-saver function, a screen-saver picture will appear when the
unit is stopped, the disc tray is open or there is no disc, or the picture is still for about
60 seconds. The purpose of this screensaver is to reduce the risk of image retention
(screen burn) caused by a static image. Image retention can affect all TV types;
however, plasma TVs are particularly susceptible to this problem.
Note: The default setting is ‘On’.
HDMI Resolution
-- Video Setup Menu --
TV Display PS
TV Type PAL
Scart / Component Comp
Angle Mark On
OSD Lang ENG
Screen Saver On
HDMI Resolution Off
480p(60Hz)
720p(60Hz)
1080i(60Hz)
1080p(60Hz)
576p(50Hz)
720p(50Hz)
1080i(50Hz)
1080p(50Hz)
Video setup menu (continued)