Filter
Top Products
23
DV30
ENGLISH
With the Audio setup menu selected, use the and arrows to move to the desired
sub-menu. Use the navigation arrows () to adjust the settings and press the
Enter button to confirm your selection. The Audio setup menu structure is as follows:
Menus Settings
SPDIF Output SPDIF Off
RAW Bitstream
PCM Stereo
SPDIF PCM Out 48k
96k
HDMI Audio Follow SPDIF
PCM stereo
Audio setup menu
Go To Audio Setup Menu
-- Audio Setup Menu --
SPDIF Output RAW
SPDIF PCM Out 48K
HDMI Audio PCM
SPDIF (and TOSlink Optical) Output
Three options are available: Off, Raw Bitstream and PCM Stereo.
If ‘PCM Stereo’ is selected, the digital output will always be Digital PCM Stereo (LPCM)
for use with a DAC, recording to an MD or CD-R machine, etc.
If ‘Raw Bitstream’ is selected, the output will be either PCM Stereo for Stereo disc or
soundtracks or surround-sound bitstream from surround-sound soundtracks. For
decoding by an external AV Receiver, see the table below:
* 48kHz or 96kHz depending on soundtrack bit depth and LPCM limit set as below.
SPDIF PCM Out
This selects whether the SPDIF LPCM output from DVDs can be at 96kHz maximum
sample rate (if the disc supports it), or if it will be downsampled to 48kHz maximum.
Some equipment can only support a 48kHz maximum sample rate and hence it can
be useful to set this maximum limit. CDs are 16/44.1 and so are unaffected.
PCM Raw
CD PCM @ 16/44.1 PCM @ 16/44.1
DVD-V Downmixed PCM Raw bitstream for
@ 24/48 or 24/96* surround sound
soundtracks
PCM @ 24/48 or 24/96*
for stereo soundtracks
DISC
SETTING