Filter
Top Products
Installation Instructions JWP-V
6
PARTS (Continued)
Table 2 shows the individual part and parts bags shipped with JWP parts.
Table 2. JWP Parts List
Item Bag Description Qty Notes
10 — MSP-MA MOUNT (with Centris bracket) 1
20 — Interface Bracket 1
30 — Wall Bracket 1 Use with 40
40 — Lag Screws, 3/8” x 3” 2 Use with 30
50 Phillips Head Cap Screw, M4 X 12mm 4
No spacers needed for
100mm x 100mm flush
mounted Centris
bracket.
60 Phillips Flat Head Machine Screw, M4 X 16mm 6
For 200mm x 100mm
and 300mm x 100mm
70 Phillips Head Cap Screw, M4 X 20mm 4
For 100mm x 100mm
recess mounted Centris
bracket. Use with 120.
80
A
Phillips Head Cap Screw, M4 X 8mm 4
Used to mount display
with Interface bracket to
Centris bracket
90
Phillips Head Cap Screw, M6 X 20mm 8
For 300mm x 200mm
and 400mm x 200mm
100 Phillips Head Cap Screw, M6 X 30mm 4
110
B
Phillips Head Cap Screw, M6 X 45mm 4
120 Nylon Spacer, .75 x .25 x .25 8
Use 4 of the 8 spacers
for 100mm x 100mm
recess mounted Centris
bracket.
130
C
Nylon Spacer, .625 x .194 x .125 6
140 Hex Key, 5/32” 1 For Set Screw
150
D
Hex Key, 3/16” 1 For Tension Adjust.
180 Phillips Head Cap Screw, M5 X 20mm 4 Use with 120
190 Phillips Head Cap Screw, M5 X 30mm 4 Use with 130
200
E
Phillips Head Cap Screw, M5 X 45mm 4 Use with 130