Filter
Top Products
PNR Series Installation Instructions
12
Reconfiguring the Swing Arms to Left or Right of
Center
1. Remove the display from the mount.
WARNING: The next step will release the arm assembly
from the mount. The arms and plate may fall if you are not
careful.
2. Remove four bolts (two on the top and two on the bottom)
securing the swing arm assembly to the top and bottom
mounting brackets. (See Figure 13)
Figure 13
3. Move the swing arm assembly left or right within slots to
desired location.
• Left of Center (See Figure 13).
• Right of Center (See Figure 14).
4. Install four bolts (two on the top and two on the bottom) to
secure the swing arm assembly to the top and bottom
mounting brackets.
5. Tighten the bolts.
6. Install the display on the mount.
Figure 14
Top bolts
Top bolts