Filter
Top Products
PNR Series Installation Instructions
14
Removing Display from Mount
1. Remove bolt or padlock from faceplate (if used).
NOTE: The pin may have been used as a more permanent
locking device. If so, remove nut and pin and move
from the lower holes to the upper holes.
2. Pull back on flag on upper mounting hole and press pin
down into "Open" position. (See Figure 18)
WARNING: DISPLAY MAY WEIGH IN EXCESS OF 40
LBS! Always use two people and proper lifting techniques
when installing or positioning display on mount.
Figure 18
3. Carefully lift display from mount
4. Lift up on pin and place flag back against faceplate to return
it to "Closed" position. (See Figure 19)
Figure 19
2
1
Remove bolt
or padlock
if used.
Pin in
"Closed"
position -
move to
"Open"
position to
remove
display.
Pin in
"Open"
position -
4
move to
"Closed"
position
after display
is removed.