CyberHome Entertainment CH-DVD 635S DVD Player User Manual


 
22
Audio connection to a receiver using the coaxial digital audio
output
At the back of the DVD player, there is a digital audio output socket “COAXI-
AL” for a coaxial cable.
This can be used to connect the following:
• an AV receiver or an AV amplifier with a digital multi-channel sound
decoder (MPEG-2, Dolby Digital, dts)
• a receiver with two channel digital stereo (PCM)
Have the following cable ready:
1. Coaxial cable (not supplied)
Connect the coaxial digital output with the corresponding input on the AV
receiver by means of a coaxial cable (not included in your accessory). The
coaxial digital audio output sends an encoded “RAW” digital audio signal to your
receiver for decoding. Please note that this connection is only possible if your
digital receiver is compatible to dts, Dolby Digital, MPEG and/or PCM.
RGBOUTPUT
RGBOUTPUT
AVCONNECTORSCART
AVCONNECTOR SCART
~100-230V
AC IN
~100-230V
AC
IN
Pb / Cb
Pb / Cb
Y
S-VIDEO
S-VIDEO
VIDEO
5.1 CHANALOGOUTPUT
5.1 CHANALOGOUTPUT
ANALOGOUTPUT
ANALOGOUTPUT
OPTICALCOAXIAL
R
L
P - SCAN / COMPONENT
P-SCAN / COMPONENT
FR
SR
SUB
WOOFER
SUB
WOOFER
FL
SL
CENTER
VIDEO OUTPUT
VIDEO OUTPUT
ON
OFF
AC SWITCH
AC SWITCH
Pr / Cr
Pr / Cr
DIGITALOUTPUT
2
AUDIO
CAUTION:TO REDUCETHE RISKOFELECTRIC SHOCK.DO NOT
REMOVE
COVER.NO USER-SERVICEABLEPAR TS INSIDE.
REFER
SERVICINGTO QUALIFIEDSERVICEPERSONNEL.
CAUTION:TO REDUCETHE RISKOFELECTRIC SHOCK.DO NOT
REMOVECOVER. NOUSER-SERVICEABLE PARTSINSIDE.
REFERSERVICING TOQUALIFIED SERVICEPERSONNEL.
I
O
RECEIVER
COAXIAL DIGITALAUDIO INPUT
1
AUDIO AND VIDEO CONNECTIONS
What is digital multi-channel sound?
Digital multi-channel sound offers you a maximum of sound quality. You need a
multi-channel AV receiver or amplifier that supports at least one of the audio for-
mats of the DVD player (MPEG-2, Dolby Digital and dts). For the formats that
your receiver supports, refer to the manual of the receiver.
A loud distorted noise comes from your loudspeakers:
In this case the receiver is not suitable for the digital audio format of the DVD
player. Playback with 6 channel digital surround sound is only possible, if the
receiver has a digital multi-channel sound decoder.