9
The method of wire arrangement (32C1, 26/32/37C3)
1. Assemble the cable holder enclosed on the back of TV (picture 1).
(ASSEMBLY METHOD: After you push the ”A” (prominence part of
cable holder) in the hole, rotate the cable holder clockwise as an
angle of 90°. You can separate in reverse order of assembly.)
2. Open the cable holder (picture 2), you can open the cable holder
that press and push “B” part.
3. After arrange lines with the cable holder, lock the ”B” again (pic-
ture 3).
The method of wire arrangement (26/32C2)
- After connecting the lines to the TV SET, you can pass the lines through the room of COVER WIRE, and then connect
the lines to the other instruments.
Supplied
Accessories
1
A
23
B