Filter
Top Products
12
Connecting an analog video source
NOTE: While connecting please ensure that the VDR 3000 and all devices that you are
connecting to are switched off.
TV/ Monitor
RL S
Selects the AC input range 115VAC or 230VAC for VDR-3000
Selects the input source to Video
Source Audio/ Video
An analog video device can be connected via composite or S-Video if available. Connect
the left and right audio output from the device to the left and right audio input on the rear of
the VDR 3000. Connect either the composite video out (yellow phono (RCA)) or the S-
Video out (mini 4 pin) from the device to the video input on the rear of the VDR 3000. Only
connect composite or S-Video – do not connect both.
Set the Input Source Selector Switch to the V position.