Filter
Top Products
Installing System Components 89
Figure 3-8. Removing or Installing the Internal SD Module
4
Connect the internal SD module cable to the connector on the control
panel board. See Figure 3-8.
5
Close the system. See "Closing the System."
6
Reconnect the system and peripherals to their power sources, and turn
them on.
1 latch 2 internal SD module
3 SD flash card 4 SD card slot (SD connector)
5 release tab 6 internal SD module cable
7 internal SD module connector 8 control panel board
5
2
4
8
3
6
1
7