Filter
Top Products
–
22
–
EN
PLAYING A DISC
You can check information about the current disc by pressing
the DISPLAY button on the remote
control.
Press the DISPLAY button dur-
ing playback to show the cur-
rent chapter
.
• The elapsed and remaining playing time of the current
chapter will be displayed.
Press the DISPLAY button to show the current title.
• The elapsed and remaining playing time of the current
title will be displayed.
Press the DISPLAY button
to show the BIT RATE and
the current repeat setting.
• If you are playing a dual layered disc, the layer number
will also be displayed ( L0: Layer 0 is playing. L1: Layer
1 is playing).
Press the DISPLAY button to remove the display.
4
3
2
1
DVD-V
IIIIIII
T L1
Changing the On-Screen Display
9/49 0:00:00 -0:03:30
Press the DISPLAY button during playback, the
current track will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
track will be displayed.
Press the DISPLAY button to show the total tracks.
• The elapsed and remaining playing time of the disc will
be displayed.
Press the DISPLAY button to remove the display.
3
2
1
VCDCD
• To clear a marker, using the Cursor buttons (
s or B)
button, position the cursor on to the marker number to
be cleared and press the CLEAR button.
• You can mark up to 10 points.
Marker Setup Screen
You can enjoy surround-sound effect with two speakers.
During playback, press the
MODE button repeatedly
until the Virtual Sirround
setting appears.
Press the ENTER button to set it 1(Natural effect),
2(Emphasized effect) or OFF.
Press the RETURN button to exit.
NOTES
:
• Select Virtual Surround OFF or adjust the volume down
if the sound is distorted.
• Virtual Surround will not be effective if the sound mode
is set to something other than “STEREO”. (for Audio
CD or Video CD play only)
• This function cannot be used during Dialog Speed.
(Refer to page 22.)
3
2
1
WMAMP3CDVCDDVD-V
Virtual Surround
OFF
Hints for the On-Screen Display
• C - indicates Chapter repeat
• T - indicates Title or Track repeat
• A - indicates Disc repeat
• A B- indicates A-B repeat
Use markers to memorise your favourite places on a disc.
Press the SEARCH MODE
button repeatedly until the
display screen and Markers
appear during playback.
Press the
Cursor buttons (
s or B) to select 1, 2, 3,
4, 5, 6, 7, 8, 9, or 10 and ensure that “
_
:
_ _
:
_ _
”
appears in the display.
When the disc reaches the point where you want
to remember, press the ENTER button.
• The Title or Track and elapsed playing time will appear
in the TV screen.
To return to the Marker later, press the SEARCH
MODE button repeatedly during playback and the
Cursor buttons
(
s or B)
button to choose the
desired marker, then press the ENTER button.
Press the SEARCH MODE or RETURN button to
exit.
NOTES:
• Opening the disc tray or turning off the power or select
AC at step and press the ENTER button will erase
all Markers.
2
5
4
3
2
1
VCDCDDVD-V
--
--
:
--
:
--
1 2 3 4 5 6 7 8 9
10
AC
Dialog Speed
Available only on discs recorded in the Dolby Digital format.
Dialog Speed plays back in slightly faster or slower speed
while keeping the sound quality as in the normal playback.
During playback, press the
MODE button repeatedly
until the Dialog Speed
setting appears.
• “OFF” appears on the TV screen.
Press the ENTER button or the Cursor button
(
s or B
) to switch among (x1.3), (x0.8) and
OFF.
: Plays back approximately at 0.8 times of
normal playback.
: Plays back approximately at 1.3 times of
normal play back.
To return to normal playback, press the PLAY
button.
NOTES
:
• Every time you press the STOP button to exit, the
setting will be turned OFF.
• Subtitle can be viewed during this function.
• Picture Control and Audio (language) setting cannot be
changed while using this mode.
• Virtual Surround does not function while using this
mode.