Denon DN-V210 DVD Player User Manual


 
57
ENGLISH
⁄7
⁄7 MP3/WMA FILE PLAYBACK
Listening to MP3/WMA CD, CD-Rs and CD-RWs
There are many music distribution sites on the internet from which music files in MP3/WMA format can be downloaded.
Music downloaded as instructed on the site and written onto a CD-R/RW disc can be played on the DN-V210/DN-V310.
If music recorded on commercially available music CDs is converted on a computer into MP3/WMA files using an MP3/
WMA encoder (conversion software), the data on a 12 cm CD is reduced into about 1/10 the amount of the original data.
Thus, when written in MP3/WMA format, the data of about 10 music CDs can fit onto a single CD-R/RW disc. A single CD-
R/RW disc can contain over 100 tracks.
Values when 5-minute tracks are converted with a standard bit rate of 128 kbps into MP3/WMA files and using a CD-R/
RW disc with a capacity of 650 MB.
Uses of recordings you have made other than for your personal enjoyment are not permitted under the
copyright law without permission of the copyright holder.
1
3
1
TOP MENU
/PBC
MENU
RETURN
ANGLE
DISPLAY
STOP
STILL/PAUSE
PLAY
ENTER
SETUP NTSC/PAL
ZOOM SLIDE SHOW
SLOW/SEARCH SKIP
3
2,3
1
Load the CD-R/RW disc on which the MP3/WMA format
music files have been written into the DN-V210/DN-V310.
(See page 19.)
• When the disc is loaded in the DN-V210/DN-V310, the
disc information screen appears.
If there are multiple folders, proceed to step 2.
If there are no folders on the disc, proceed to step 3.
FOLDER 01
FOLDER 02
FOLDER 03
FOLDER 04
FOLDER 05
Edit Mode
: Off
Program View
Add to Program
JPEG Preview
2
Use the 5 and cursor buttons to select the folder
containing the file(s) you want to play, then press the
ENTER button.
• If there are multiple folders furthermore, proceed to
step 2.
To change the folder
Use the 5 and cursor buttons to select “
Up..” at
the upper of the screen, then press the ENTER button.
The another folders reappear in the disc information
screen. Select the desired folder.
FOLDER 01
FOLDER 02
FOLDER 03
FOLDER 04
FOLDER 05
Edit Mode
: Off
Program View
Add to Program
JPEG Preview
Remote control unit
ENTER
Remote control unit