Filter
Top Products
14
ENGLISH
[3] Operating devices for which the preset memory is set
For details, refer to the individual devices’ operating instructions.
Note that some devices and some buttons may not be operable.
If this case, use the learning function to store the device’s remote control signals in the RC-8000.
q Press an icon in the icon display section to select the device to be operated.
w Use the and buttons in the page display section to display the page on which the button you want to
operate is located.
e Press the button you want to operate to send its remote control signal.
• The displayed button names are the same as the default button names.
• The button names for buttons from which signals can be transmitted are displayed in black characters.
• The button names for buttons at which no transmission codes are set are displayed in gray characters.
• No transmission codes are set for buttons which do not have button names.
NOTES:
• The signals registered at the buttons (the presence or absence of transmission codes) depend on the preset
code which has been set.
• If the contrast is strong, it may be difficult to read gray characters. If this is the case, adjust the contrast so
that gray characters are easier to read.
The names of buttons on the devices you are operating with the RC-8000 may differ from the names of the
buttons on the RC-8000. If so, the names can be changed for greater ease using the procedure described in
section “Changing the button names” (page 30).
2 TV preset memory buttons
Transmission codes
of independent buttons
CH• : TV channel
CHª : TV channel
VOL• : Main volume of AV amplifier
VOLª : Main volume of AV amplifier
MUTE : Muting of AV amplifier
2 DVD (DVD player and DVD changer) preset memory buttons