Filter
Top Products
31
ENGLISH
User Menu
When “USER” is registered in the icon display section and the “User Menu” is set, the user screen (“CUSTOM 1/2”)
always appears when the liquid crystal display is redisplayed.
“Learn” buttons that are frequently used at the user menu to eliminate the trouble of searching for buttons and make
operation easier.
q Press the “SETUP” icon in the icon display section for at least 3 seconds to display the setup screen.
Press the “User Menu OFF” button on the “Setup 3/4” page to set this to “ON”. When this is done, the user
menu is always displayed when the liquid crystal display is redisplayed.
The setting switches between “ON” and “OFF” each time the button is pressed.
This setting cannot be made unless “USER” is registered in the icon display section.
7
ONE-BUTTON SEARCH FUNCTION
Try using this function if you cannot find the desired remote control signals with the normal preset memories.
[1] Using the one-button search function
Learn the “POWER” button of the remote control
unit for which you want to set the preset memory in
order to search for the preset memory for those
remote control signals.
q At the “Edit Device” and “Add Device” brand
selection screens when setting the preset
memory in section “Changing the preset
memory of preset devices” on page 12, press
the “Search” button to display the learning start
screen.
w Press the “Learning Start” button on the
learning start screen, then press the “POWER”
button of the remote control unit for which you
want to set the preset memory to learn it.
Screen q
USER screen (1) USER screen (2)
Screen q
Screen w