Directed Electronics Ready Remote Universal Remote User Manual


 
62
© 2006 Directed Electronics
locks" are not recommended for any high current heavy
gauge wiring. Also, if the vehicle has more than one 12-
volt input wire, then connect one red wire to each.
TThhee vveehhiiccllee ssttaarrttss,, bbuutt iimmmmeeddiiaatteellyy ddiieess..
Does the vehicle have an immobilizer? The vehicle’s immo-
bilizer will cut the fuel and/or spark during unauthorized
starting attempts.
TThhee vveehhiiccllee wwiillll ssttaarrtt aanndd rruunn oonnllyy ffoorr aabboouutt 1100 sseeccoonnddss..
Is the remote start programmed for voltage sense? Try
programming the unit using a tach wire.
gglloossssaarryy ooff tteerrmmss
Control Module:
The “brain” of your system. Usually hidden
under the dash area of the vehicle. It houses the microprocessor
that monitors your vehicle and controls all system functions.
FAD: Factory Alarm Disarm. Some vehicles with a factory alarm
require the alarm to be disarmed before remote starting.
RAP: Retained Accessory Power. After the vehicle is started and
then shut down, the power to the radio remains on (retained)
until a vehicle door is opened.
Transmitter:
A hand-held, remote control which operates the
various functions of your system.