Filter
Top Products
13
4. Aim the DIRECTV Universal Remote Control at
your TV/VCR Combo and press Power once.
The unit should turn off.If it does not respond,
repeat steps 2 and 3, trying each code listed for
your brand until you find one that works.If it
still does not work,try Searching For Your Code
on page 23.
5. If you’ve located a TV/VCR setup code that
works your TV/VCR Combo and a separate TV
code is also listed,you’ll need to program this
code into the DIRECTV Universal Remote
Control to access volume control (see
Programming Other Device Control on page 11).
If there is no separate TV code listed, you will
need to perform the following steps to access
volume control:
a. Press and hold Setup until the VCR key
blinks twice,then release Setup.
b. Enter 9 - 9 - 3.The VCR key will blink twice.
c. Press VCR once. The VCR key will blink
twice.
6. For future reference,write down each working
device code in the below boxes:
TV/VCR Code:
TV Code (if used):
DirecTV Mnl MDTV6 3/21/03 2:04 PM Page 13