Filter
Top Products
25
USING THE MASTER POWER KEY
The DIRECTV® Universal Remote Control is equipped
with a unique feature that allows you to sequentially turn
on or off all of your home entertainment devices with a
single key press in the following way:
1. Point the remote control at the devices.
2. Press and hold Power for 3 seconds to activate
the Master Power feature.Thereafter,your
DIRECTV Universal Remote Control will
sequentially turn on or off all of your home
entertainment devices.
Depending on what mode is currently selected,
the DIRECTV Universal Remote Control will
send IR commands to the devices in this order:
For example, if TV is selected,pressing and
holding Power for 3 seconds will first turn on
(or off) the TV,then the VCR,then the auxil-
iary device,and finally the DIRECTV Receiver.
NOTE: The DIRECTV Universal Remote Control
always defaults to the SAT mode after all devices are
turned off. Therefore,the initial power-on settings
will always be SAT,TV, VCR,and AUX,with the remote
control returning to the SAT mode as long as no other
device key is pressed first.
Start Mode Device On/Off End Mode
SAT TV,VCR,AUX SAT
TV VCR,AUX,SAT SAT
VCR AUX,SAT,TV SAT
AUX SAT,TV,VCR SAT
DirecTV Mnl MDTV6 3/21/03 2:04 PM Page 25