Filter
Top Products
Remote Controls
53
Controlling Other Components
1
2
3
4
5
6
7
8
9
10
11
R
1
2
3
4
5
6
7
8
10
R
11
Reading Out the Device Codes
You can find out what device code you’ve set for each remote control mode (TV, VCR, and
AUX)
.
Instructions Additional Information
6 Press the UP or DOWN ARROW
repeatedly until the device turns off.
As you press the UP or DOWN ARROW, the
remote tries each code in the memory to see if
it can turn off your device. When the device
turns off, you have found a code that might
work.
Note: The mode button for the device will flash
rapidly eight times when you’ve scanned all the
codes for that device.
7 Press POUND (#).
The mode button flashes three times if you
have entered the code correctly. This stores the
code you found.
8 Turn the device back on and try some
other buttons to make sure they work.
Press POWER to turn the device back on. Try
some other buttons to make sure they work.
Sometimes POWER works when other buttons
don’t.
9 If necessary, repeat this procedure until
you’ve tried all the codes.
You may need to repeat the scan to find the
best code for your device.
Instructions Additional Information
1 Press and hold the appropriate mode
button until all the other mode buttons
light up, and then let go of the button.
The mode button flashes.
For example, hold TV for a TV until all of the
other mode buttons light. When you let go, TV
will flash.