Filter
Top Products
Connections and Setup
71
Connecting to a TV
1
2
3
4
5
6
7
8
9
10
11
R
1
2
3
4
5
6
7
8
9
10
R
YPBPR Connections
The YPbPr connections provide high-quality audio and video to your HDTV or HD monitor.
1 Connect between the YPbPr component connections on the receiver and the HDTV using
component video cables.
2 Connect audio (red and white) RCA-type cables between the receiver Audio Outputs and
audio input connections that go with the YPbPr connectors on your HDTV or monitor.
3 If you do not see a picture, change the resolution setting on the receiver.
4 Turn up the volume on your HDTV and confirm you have sound. Check the RCA-type
connections if you don’t have sound.
No Picture on the HDTV
This section will help you make a picture on the HDTV in the event that you could not do
so in the previous sections.
1 Connect RCA-type cable connections between the receiver Out and the HDTV.
2 Make sure the receiver and HDTV are on.
3 Make sure the HDTV is set to display satellite TV. Look on the back of your HDTV and
consult your HDTV user’s guide.
4 On the receiver front panel, press SYS INFO.
5 Change the HDTV settings as described on page 72.
6 Switch to the HDTV to display satellite TV. If you have a picture, you are finished.
7 Repeat steps 5 and 6 until the HDTV displays video from the receiver.