Filter
Top Products
10
Making connectionsDX-24LD230A12
Using composite video cable (good)
To connect a cable or satellite box using composite
video:
1 Turn off your TV/DVD combo and all connected
equipment.
2 Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3 Connect an A/V cable (not provided) to the VIDEO
IN/VIDEO 1, and L, R jacks on the back of your
TV/DVD combo and to the composite video and
audio out jacks on the cable or satellite box.
4 Turn on your TV/DVD combo, then turn on the cable
or satellite box.
5 Go through the setup wizard described on page 16.
6 To watch TV, press INPUT to open the INPUT SOURCE
list, then press INPUT repeatedly, or press
or to
select A/V, then press ENTER/.
Using coaxial cable (good)
To connect a cable or satellite box using coaxial cable:
1 Turn off your TV/DVD combo and all connected
equipment.
2 Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not provided) to the
ANT/CABLE IN jack on the back of your TV/DVD
combo and to the coaxial out jack on the cable or
satellite box.
4 Turn on your TV/DVD combo, then turn on the cable
or satellite box.
5 Go through the setup wizard described on page 16.
P
B
P
R
Back of TV/DVD combo
Cable or satellite box
A/V cable
Cables are often
color-coded to match
color-coded jacks.
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
P
B
P
R
Cable or satellite box
Back of TV/DVD combo
Coaxial cable
DX-24LD230A12.book Page 10 Tuesday, August 16, 2011 2:58 PM